Multi-Tech ISIHI-2S Especificaciones descargar pdf (Pagina 66)

66 MultiModemISI Hybrid Series, ISIHI-2S/2U

Chapter 3—Software/Driver Installation

Miscellaneous:

Device files corresponding to ports on the ISIHI-2S cards are created in the /dev folder.

Use ttyMxy for normal ports and cumxy for corresponding callout ports. The letter x is

the card number (14), and y is the port number, (ap) for 16-port cards.

Normal ports (ttyM) are configured for dial-in connections. Callout ports (cum) are used

for dial-out connections.

To view busy I/O address space on your system, type:

cat /proc/ioports

To view busy IRQs, type:

cat /proc/interrupts

To load the driver manually, use insmod.

Example: To load two ISI cards configured with base I/O addresses 0x210 and 0x200 and

IRQs 5 and 10, enter the following in the destination folder:

insmod isicom

ISIBase1=0x210

Irq1=5

ISIBase2=0x200

Irq2=10

To remove the driver manually, type rmmod isicom. This removes the driver only if no

ISI ports are in use.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 187 188

Sin comentarios

Multi-Tech ISIHI-2S Especificaciones Pagina 66