Multi-Tech ISIHI-2S Especificaciones descargar pdf (Pagina 107)

MultiModem ISI Hybrid Series, ISIHI-2S/2U 107

Chapter 5—TERMINAL ADAPTER AT Commands, S-Registers, Result Codes

S32 Escape Sequence Timeout

Unit: 100 ms

Range: 0255

Default: 20

Sets the time allowed in an escape sequence from the receipt of the A in AT to the receipt

of the carriage return. If the S32 time interval expires before you press ENTER, the escape

sequence ends. The default time is 2 seconds.

S50 Caller Line ID CLI

Unit: Decimal ASCII code

Range: 0 or 1

Default: 1 (enabled)

Sets whether the mechanism for identifying the two endpoints of a connection is enabled

or disabled. Since RING messages only appear for ISDN data calls, the CLI feature does

not define a means of conveying Calling Party information to the terminal for ISDN voice

calls. The CLI information is only included with the first RING message for a given

incoming call, and appears as follows:

RING FM: 5552000 TO: 5551000

If the Calling Party Number information is not included in the incoming SETUP message,

the RING message appears as follows:

RING TO: 5551000

If the Called Party Number information is not included in the incoming SETUP message,

the RING message will appear as follows:

RING FM: 5552000

If neither the Called Party Number nor the Calling Party Number is included in the

incoming SETUP message, the RING message will contain no additional information.

S52 Auto-Protocol Detection

Unit: Decimal ASCII code

Range: 0 or 1

Default: 1

Sets whether the mechanism for identifying V.120 or PPP, operation is enabled or

disabled. This is applicable for an ISDN data call and once determined by the TA, the

protocol used by means of the information conveyed by the SETUP message, then the

indicated protocol is activated. The default setting is 1, which enables the Auto-Protocol

Detection function.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 187 188

Sin comentarios

Multi-Tech ISIHI-2S Especificaciones Pagina 107